NR200 x MSI Ventus deshroud mod (Arctic P12 Version)

TLDR

1. Deshroud mod for the Ventus 3080/3080Ti/3090 in the Cooler Master NR200 case
2. Fan shrouds designed to perfectly fit the Arctic P12 and bridge the gap between the fan and the GPU heatsink
3. The Normal Fan Screws version of the fanshrouds allows you to mount the fan shroud to the fan using standard case fan screws, for other mounting options see the "How to mount" section below
4. Mod also available for the Noctua NF Series (NF-A/S/F12) and other Generic 120mm Fans

Notes

MSI Ventus 3080 only?

Yes and no. Yes because this is designed to hug the Ventus' radiators as snugly as possible, so unless other cards are of the exact same height post de-shroud, this would either be too tall / short. On the other hand, the ventus 3080, 3080Ti & 3090 from MSI all shares the same cooler so technically this also supports the Ventus 3080Ti & the 3090.

Arctic P12 only?

The fan shrouds included in this listing here will only fit the Arctic P12, however I've created new ones for the Noctua NF Series (NF-A/S/F12) & Generic 120mm Fans.

How to mount?

There are 3 ways to mount the shrouds to your P12s and they will require you to print different models:

1. Mount using fan screws (Recommended)
   P12-L Shroud (Normal Fan Screws).stl
   P12-R Shroud (Normal Fan Screws).stl
2. Mount without fastners (There are tabs designed into the model which allow the shrouds to rest snugly on top of the fans without any fastners)
   P12-L Shroud P12-L Shroud (No Screws).stl
   P12-R Shroud (No Screws).stl
3. Mount with corner brackets (Looks the best, but you will need a few M3 x16 screws)
   P12-L Shroud (M3 Screws).stl
   P12-R Shroud (M3 Screws).stl
   P12-Bracket.stl x8

Bracket with Logo?

If you choose the 3rd mounting method, you can choose to print 1-2 P12-Bracket-RTX_Logo.stl instead of the normal variety, these are special brackets that have "GEFORCE RTX" embossed on it and looks quite cool!

Like, download and visit my Patreon!

Have nice day!

Arctic P12 model used in rendering by C. L. (Adapted)
Heatsink model used in rendering by HDRI (Adapted)