Breacher Side Saddle

Carry 8 Silly shells for double loading the Breacher.

Requires:

• 2 M3 nuts
• 2 M3x30mm Bolt

Print 2 sets of parts (left and right). 135 deg is the stock tightness. Print the right piece out first and test fit then print out remaining parts. 

I did 0.28mm layer

5 walls 20% infill.

Put it on the blaster where you want. Insert nut into cavity. Has a bump for the nut to stay locked in. Use the screwdriver to push the nut in.

See it in action here:

A side saddle for double loading shells on the Breacher