Dart Zone Max Solo Inline Clip for Aluminum Barrel

Uses a 15mm (OD) x 13mm (ID) aluminum barrel like this: https://www.amazon.ca/dp/B0CX45FQDN?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1. Cut the barrel however long you want, but I made mine so it just barely leaves the 3d printed part. Use a 2 part epoxy to secure the barrel into the print.

I also made it have a full picatinny rail on top for any sight. Holds 3 darts, may need to tilt down slightly after each shot to chamber the next one.