Buzzbee Pixelator 16 mm breech adapter

3D model description

This adapter can accept a 16mm barrel and is drop in for the Buzzbee Pixelator. *Anodized barrels will have a tighter fit

Will require 1 short 4-40 screw. ( the countersunk one commonly used in slug hardware kits) and a pusher breech to load darts.

Message me with feedback! :)

3D printing settings

15-25% Infill
Standard heat and bed temp for PLA for your printer.

tested on a Bambu labs X1-Carbon.

highly recommend printing this in orange, or at least the tip if you can do multi-colored prints.