Qidi X Plus 3 belt tensioner repair
This is a simple repair brace for the belt tensioner screw. its intended to just be glued on. No hardware required
6
6
0
116
updated
July 25, 2025
Description
PDFprint as is for both sides. the hole is offset so install in the orientation that has no overhangs.
the hole is 8.5mm so with shrink it should be a snug fit. glue any existing cracks before installing.
this print with default settings should take less then 5 minutes each.
Tags
Model origin
The author marked this model as their own original creation.