I created this mount based on the default placement of the SimpleAF BTT microprobe mount to be used with the Ultimate Creality K1 / K1C / K1SE / K1 Max D3D Linear X Rail Upgrade.
Because the placement is the same as the default microprobe mount of SimpleAF, you can just use default option when installing SimpleAF on your K1/C/MAX. Unfortunately in order to achieve the same placement 1 of the holes to mount the microprobe with won't be fully enclosed. In my experience so far however that doens't seem to be an issue and the microprobe is mounted just fine.
In order to use this mount with the aforementioned linear real upgrade you need to print the "X Carriage Cartographer.stl" as it utilizes the same mounting holes on the X carriage.
For me, the regular mount has enough clearance for probing as well as enough clearance during printing when the probe is retracted. However I use the CHCB-OTC hotend upgrade which is slightly longer than the original unicorn hotend. That is why I also added the slightly shorter mounts in order to accommodate for this.
There is support needed due to the geometry that is required to fit the X carriage. The STL groups the 3 mount options together in 1 file and is already oriented correctly for optimal placement and embossed with the relative height difference.
The stepfiles are there for modding convenience.
The author marked this model as their own original creation.