Nikon SB-26 Hot Shoe mount flash repairing

A spare hot shoe mount for the Nikon SB-28 camera flash repairing.

3D printing settings for nylon:

0.25 (0,2) mm nozzle 
0.08 (0,1) mm layer height

• walls ≥6
• 6 layer top/bottom
• filling ≥ 40%
• support - yes
• brim 5mm
• speed ~30-40 mm/s
• fan -off (20% for bridge)

I printed PETG, but I wasn't sure of its reliability. That's why I used pre-dried PA-66 nylon and can recommend this material.

I haven't tried printing with a 0.4mm nozzle, but it might be worth trying and then finishing with sandpaper.