Anycubic Kobra S1 Hotend Cover + Fan Duct WIP UPDATE

Now you can upgrade your Kobra S1 with colourful, personalised Fan covers! + Duct

Update1: Many tolerances and small details fixed, added hooks for the Duct, added Duct and tested both for compatibility and durability. i recommend using the new files for best results.

Everything is made to be cross-compatible with the Original Fan, Screws, Duct. just print and assemble it.

-you may want to prime the holes with a hot screw very careful first. (I used a lighter and a screw taped to a screwdriver)

-The Walls are very thin, and the standoffs break easily with too much force before fan and duct are assembled.

For now I modeled it to be as close to the Original as possible, even the weight of the Coveris almost the same at ~30g I might add a more Print-friendly version in the future.

I printed the Prototype in PLA and for PLA-Prints it worked just fine in my tests. I use a textured build plate, that makes the shiny pattern.

More models and Logos to come. Let me know in the comments, what you like to see next, I might add it to the files soon. :)

Clicks into place easily and doesn't get loose by itself: