Qlima dehumidifier models D820 and D825 house a Hepa filter and will clean your air and remove moisture.
Unfortunately these filters cost around 40 euro's and have to be replaced within months if the dehumidifier is used in a dusty cellar.
Ikea Uppatvind Hepa filters are slightly smaller, but will cost only 4 euro.
This filter housing will make your Qlima dehumidifier ready to fit a Uppatvind filter.
Note that there is no mesh for bigger particles like in the original filter holder so filters have to be replaced more frequent. Also the Ikea filter is of lesser quality, but as I see it, the main function of the divice is removing moisture and I can live with a filter of less quality.
I printed mine in PETG, 3 walls thick.
Clips (2x) and lips (3x) need to be printed seperately for better print orientation and will press-fit in the main holder. I had to use some force with a little hammer.
The filter holder will not fit on Mk4 sized machines. I printed mine on a Creality K2 plus.
The author marked this model as their own original creation.