ZANUSSI (ZFC245R) fridge shelf

Original replacement shelves are very expensive and/or not available. So i designed this one myself..

Print Settings

Printer Brand:

eMotion Tech

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

0.3mm

Infill:

Notes:

Printed with support and 10% infill.

About 100g (but I guess this design could be improved to use less matter).

How I Designed This

The 2 parts to print fit together in the fridge door just with 2 compressed wood boards cut just at the right length (about 70mm x 380mm for the horizontal board and 400mm x 35 mm for the vertical one).

No glue, no screws!

This assembly can supported several kilograms or bottles.