Himiko Toga My Hero Academia HueForge

 The Model is 180.08x240mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA eSun Beige Transmission Distance: 4.5
PLA PolyTerra Cotton White Transmission Distance: 1.5
This print uses 3 unique filaments

Swap Instructions:
Start with Charcoal Black
At layer #11 (0.96mm) swap to Beige
At layer #18 (1.52mm) swap to Cotton White for the rest.