Case For Raspberry Pi 5, Waveshare PoE Hat F And Pineboard Hatdrive! AI

This model is a case for the Raspberry Pi 5, Waveshare PoE Hat F and the discontinued Pineberry Hatdrive! AI board, which can still be found stocked at some retailers. There are two lids available currently, both with a vent for the fan and one with a hole for camera cables.

The following electronics and hardware are needed to build this model:

• Raspberry Pi 5
• Waveshare PoE Hat F
• Pineberry Hatdrive! AI (discontinued)
• 12x M2.5 heat set inserts
• 12x M2.5x8 screws
• 4x M2.5x12 screws
• 8x M2.5 washers

A colour 3D preview with optional AR is available to view here. The build guide is available as a PDF under the Files tab above.

If you find this model useful please consider supporting me by joining my club here on Printables, even if only for a month. Thank you!