Darth Vader Hueforge

Darth Vader, Hueforge emerging from the dark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.5x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used:
#d1d3d5 PLA BambuLab Basic Light Gray  Transmission Distance: 1.7
#080a0d PLA PolyLite Black  Transmission Distance: 0.3
#c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
#ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Light Gray
At layer #4 (0.4mm) swap to Black
At layer #7 (0.64mm) swap to Red
At layer #13 (1.12mm) swap to Jade White for the rest.