Nekomata Lonx - Lonx 2.1.0 Remix by SFI

UPDATE:
10.02.2025
-Fixed Rail Screw Hole Positions on Shroud and Spacer Rails.
-Added full assembly in step format.

Nekomata Lonx 2.1.0

Nekomata: A family of remixes of the Lynx 2.1.0 platform that incorporates some original design along with a collection of various modifications I liked.

New Features:
-Full flat top picatinny rail. 
-Newly designed mag release lever integrated into the stock. Grants a total of 3 different ways to release the magazine so you can adapt to however you might need in the heat of the moment
-Decorative panel on the grip back.
-Orange muzzle has a wide enough inner diameter to fit a GFZ BCAR inside it. There is also an additional file for a more minimal Orange muzzle if you need more room than the original.
-New optional Ambidextrous mag release Receiver mostly based on the Foamgasm design, but customized to have a spot to either use your thumb OR your trigger finger on both sides of the receiver!

Borrowed features:
-PKI tensioner buttstock.
-Foamgasm thumb release.
-Remnant shroud cutout

Please note: This remix requires some supports to print best. Also note that the parts are not currently oriented in the proper position for printing. Use your best judgement for where and when to use supports, brims, and how a part should be oriented. If you've printed a Lynx before, you should have no issues. 

This remix also requires some additional hardware that is not standard in the Lynx Hardware Kit.

1x 1/4-20 x 1" Hex Head Bolt (PKI 2.1 Lynx)

1x 1/4-20 Hex Nut (2.1 Lynx)

1x 1/4" Flat Washer (2.1 Lynx)

1x Ball Plunger Detent (2.1 Lynx)

2x 3/32" OD x 7/16" Steel Dowel Pin (Foamgasm and Ambi Lynx Thumb Release)

6x M3 Square Nut (Rail and Orange Tip)

4x M3 Hex Nut (Orange Tip and Cheek Rest)

1x M3x12mm Hex Standoff (Triple Release Lever)

3x M3x10mm Socket Head Screw (Orange Tip)

2x M3x25mm Socket Head Screw (Cheek Rest)

5x M3x6mm Countersunk Screw (Rail)

2x M3x8mm Pan Head Screw (Triple Release Lever)

For convenience, I am offering an addon kit on the SFI shop: https://silverfoxindustries.shop/collections/designs-by-sfi/products/nekomata-minx-lynx-lonx-add-on-hardware

If you are interested in fully printed BIY or Assembled Blasters, I will also be offering them on the SFI shop: LINK COMING SOON

Do not sell prints of this. If you want to sell printed parts or full blasters, please contact me at [email protected] and we can work out a licensing deal of some kind.

There are currently NO licensed resellers.

The only place to get prints and builds is currently https://silverfoxindustries.shop/!

There's like, a lot. Buncha greebles and modifications that make it almost completely changed from the original design.