Sovol Zero Feet Extensions

It's a cylinder with a hole in the middle. WITH CHAMFERING, that's how you know it's high-quality.

Did you do something silly like toss a large power supply under your Sovol Zero, and now you wish you had just a little more room under there because you're terrible at cable routing, and also you can't make other, better options fit because you put things in the way and you're too lazy to change either your mounting bracket or the feet you're using? Well, I have what you've been looking for: the Foot Tube (we're still workshopping the name). Make your Zero think it's 20mm taller with this one weird trick. And some plastic.

You'll need to print four of these, unless you have a special Zero with five feet or a tripod or something. Replace the stock M5x20mm BHCS attaching the feet with an M5x40mm screw. (BHCS? SHCS? WhateverCS! Live dangerously, use a wafer head!) Lifts the printer exactly 20mm unless your filament calibration is a mess, but I definitely can't help you with that. Guaranteed not to set your printer on fire. Unless you light the feet on fire, in which case, it'll probably set your printer on fire.

No warranty. If it breaks, you get to keep both pieces.

This is the dumbest thing I've uploaded to Printables.

So far.