Daredevil picture - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 136x170mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.4mm and the Actual Depth is 1.4mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA 3DLogic Dark Gray Transmission Distance: 0.3
PLA HIGH SPEED 3DPower Telegrey Transmission Distance: 3.1
PLA HIGH SPEED 3DPower Pure White Transmission Distance: 2.3
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Dark Gray
At layer #9 (0.8mm) swap to Telegrey
At layer #13 (1.12mm) swap to Pure White for the rest.
 

My custom frame for this model: 
https://www.printables.com/model/1354495-picture-frame-for-my-hueforges