Einhell TE-SV 18 Hoover Wall mount

Einhell Hoover Wall mount

A wall mount for an Einhell Power X-Change 18V cordless hoover TE-SV 18 Li-Solo.
The original wall mount was too big for me, so I designed a smaller one.

### Fittings

• 2 wood screws 4x40mm
• 2 wall plugs d=8mm

Temperatures, Speed and Materials

• Filament: PETG
• Printing speed: 180.0mm/s
• Perimeter: 3
• Layer: 0.2mm
• Infill: 15%
• Infill pattern: Adaptive cubic
• Print temperature: 240°C
• Temperature hotbed: 75°C
• Brim: No
• Support: No
   

Approximate Printing Times and Filament Quantities

• Wall Mount: Time: ~3:43h, ~Quantity: ~91.86gr, ~30.55m