Rock Climbing, Key Holder

I made this keychain board for my car keys, keys, etc. I made my nuts out of 2mm metal wire and some cramp connections. Over that some colored shrinking tubes and then a clear protective color. The nuts are made on an SLA printer and the board is on a Prusa MK3S+

Wire: https://www.aliexpress.com/item/1005007022745768.html 

Crimping tool: https://www.aliexpress.com/item/1005006151901483.html

Wire Chrimp: https://www.aliexpress.com/item/1005005563451179.html

Shrink Tube Color 2mm / Trans 3mm: https://www.aliexpress.com/item/1005005563269357.html

3D printing settings

Board:
Print in PLA or any material you wish
I have used fuzzy skin
Skin Thickness 0,25mm
Skin Point distance 0,6mm

The nuts, have been printed on an Anycubic Photon M5S Pro with standard resin V2. But they could easily be printed on a FDM printer

Join the community • Coffe • Cults3D • Printable • Discord • Tiktok • Youtube