Printable spare Wyze Cordless Vacuum canister seal.

General:

Print your own spare seal for Wyze Cordless Vacuum. The only modification from the original part profile is that I changed the small thin radius to an angular face for better printability.

Why I designed this:

My Wyze cordless vacuum is great, but it's the first gen, and the seal on the canister falls out easily when I empty it. I designed this to print a spare seal. 

Printing notes:

Layer height: .15-.20

Recommended Material: TPU Softer is better

Supports: Snug, painted as shown in the CAD image in green

Infill: 15% Gyroid or rectilinear

Walls: 2-3

Other Modifiers: Print as oriented

Material Quantity: ≈11grams

I printed from Overture 95A TPU on at .2 layer height with 15% gyroid infill.

_____________________________________________________________________________________________________________

Don’t forget to follow me, post a make, leave a like, or tell me what you don’t like so I can make improvements.

Thanks, and Happy Printing!

Also check out:

My wall mount based on the OG Wyze cordless vacuum. Also works for the model S.

https://www.printables.com/model/1358524-wyze-cordless-vacuum-wall-mount

https://fabtechmfg.square.site/