Ratchet strap reel (clicky assembly)
Description
PDF24/10/12: Cleaned up: Archived old data and updatd description. Uploaded videos for newest version.
Always secure your items adequately when traveling and make it easier to roll up the tensioning straps ...with this print.
Printed parts only!
Recommended print settings for sufficient stiffness:
PETG (PLA may get soft if stored in car)
wall loops: 4
infill: triangles 23%
top/bottom layers: 5
layer hight: 0,2 (bigger layer hights may work too and save time)
Crank 3 is print in place. Break the small sleeve free to achieve a better winding experience.
This is intended for belts with width <30mm however you can scale the parts for wider or thicker belts. As a reference: a 5m belt with a thickness of 1mm will fit very good.
Forgot to mention that you need to add a small amount of grease to the “bearing" surfaces in the video.
spool belt car winder ratchet strap Spule lashing tension tensioning car organiser organise tidy wind
Tags
Model origin
The author marked this model as their own original creation.
