Auxiliary Handle

An auxiliary handle for walking cane users that aims to support them when standing up. Useful and common among those recovering from or with physiological limitations, as well as the elderly. The Handle assembly consists of two (2) printed parts; the Handle and the clamp.

The parts are designed to fit a cane of 22 mm diameter.   The following accessories are required: 

3 M6 flat spaces

2 M6 Lock Nuts

1 M6 Phillips Head PAN X 20 mm 

1 M6 Phillips Head PAN X 40 mm

Printing - I used 60 % Infill PLA 0.20mm for the Handle and 25 % infill for the Clamp.

The assembled Handle is attached to the walking cane right below and perpendicular to walking cane's original handle.