Cameramount Prusa MK3/S/S+

Cameramount for a Nightvision Raspberry Pi Camera on the X-Axis of my Prusa MK3 Printer.

This is a Variaton of these designs:

https://www.thingiverse.com/thing:2802522

https://www.thingiverse.com/thing:2873677

Thanks for the idea!

You will need some M3 Cap Screws to mount the parts.

Cameraholder 1 and 2 are connected with a small rod (approx. 2.5mm diameter) I had laying aound. I think I cut off a piece of an axel.

 But you can also cut off the head of a M3 screw and thread it into the holes.

You will find a Housing for the needed Raspberry Pi here:

https://www.prusaprinters.org/prints/135527-octo-pi-raspberry-pi-housing