Labubu Keychain Fun and Quick 3D Print!

Labubu Keychain Fun and Quick 3D Print!

Here’s a fun 3D print of the famous Labubu toy figures perfect as a keychain! It’s a quick and easy print, great for adding colorful details.

🖨 Pay close attention in your slicer program to which layer you need to pause on to change colors. This varies depending on the program. I’ll include images showing exactly where to pause or change color.

For example:

In Creality Print 5, with a layer height of 0.16 mm, I needed to pause at layer 12.

With a layer height of 0.20 mm, the pause was needed at layer 10.

⚠ Please note: this may differ depending on your slicer and settings. Always double-check using the preview mode or compare with the images to determine the correct pause point for your color change.

🎨 Tip: Add a nice cord, key ring, or other accessory – and you’ve got a super fun keychain ready to go!

Also check out my youtube channel and support me by subscribing and possibly watching!

www.youtube.com/@ElektroTechNL http://www.youtube.com/@ElektroTechNL?sub_confirmation=1

Recommended print settings:

Layer height: 0.20 mm or 0.16 mm (or as you prefer)

Infill: 15% (or as desired)

Supports: Not needed

Material: PLA (or any material of your choice)

With a multi-color printer it’s even faster, but it works great on a standard printer too!