Onemouse + side button (upd. 24/07/25)

Update list

16/07/25

- **Updated side button slot:** the travel of the **mouse_5** button has been reduced.  
- **Ring-finger support extended.**

24/07/25

- **Updated front part**: Improved torsional resistance for *mouse_1* and *mouse_2* clicks. Now, there's no lateral movement (left to right or vice versa) when performing actions like spraying.

- **Updated back part**: improved rigidity, for finger support ( they don't flex much now).

## Modifications Summary

I added a side button to the original design, and made the following changes:

### Front Part
- Added two holes to improve rigidity. This was necessary based on testing, in *CS2*, the mouse_1 button would stay pressed for too long. Trying to shoot a single bullet rapidly with the AK often resulted in a full spray.
- Other minor modifications were made, but none had a significant effect.

### Back Part
- Added functionality for the side buttons.

### Battery Holder (*Porta_batteria*)
- Retained the original AAA battery holder, as I prefer longer battery life and don’t mind the extra weight.
- Modified the holder so it can be mounted without desoldering the DPI button.
- Lowered the screw hole height, as the original design didn’t leave enough thread for proper fastening.

> **Note:** On the front part, the area that presses on the switches was uneven due to support structures.  
> To overcome this, I applied a coat of clear gloss (e.g., *Tamiya X-22*).