Playpen Panel Support/Stand Feet

Small flushed playpen panel support that was created to fit the ‘Simple Deluxe’ 8 panel playpen for pets. 
It should be able to fix snugly to also the FXW metal frame pet playpen. 
If not, please let me know I can create another model for that dimension of frame.

Made this to somewhat stabilize panels that are not connected together to add little subtle reinforcement, left a gap so they could go in and out of hour backdoor but we and have the gate still be on our side so we have access to get in. 

To keep it from sliding on hardwood floors, you can stick a silicone adhesive feet on the bottom of the print for grip.

Length: ~92mm
Width: ~40mm 
Gap width for panel: ~15/16mm (this is base off my panel measurements)

Recommend using a  0.6-1mm nozzle. 
It will orient the model to print with the base down, but recommend rotating it 90 degrees to print on its side for maximum strength. 

I used PLA+, but recommend more durable filament.
My puppies are not interested in it since its flushed to the panel, they cant really chew on it.