RC Onroad wheels and tires 65mm, 12mm hex

Description

With some cars, the drift tires are way to slippery, and the onroad rubber tires they finish so so fast, i needed something that i can use on road, and still drift.

Onroad wheel and tire combined, 65mm diameter, 12mm hex. The shaft hole is 4mm, but its easy to add a negative cylinder, center the wheel and a cylinder of the desired diameter. keep in mind to do ad 0.1mm for tolerances.

I created it for my HyperGO 14211, on the stock wheels dimensions, but its nothing specific to it.

Materials:

TPU (95A) has a bit more traction than a smooth drift tire, you can do some higher speed drifting.

Printing tips:

0% infill, Concentric top layer, 5 perimeters, enable supports - snug. Any infill you would use is not perfectly distributed in the tire so it will create wheel unbalance. Printing in TPU, 0% infill makes the tire have a little flexibility also. There is a picture with the settings. Or use my profile.

Enjoy as much as i do :)