Nadir's CN3D clicky shroud for eddy USB cable-SV08 stock toolhead, stock cooling

Original model made by Nadir from CN3D the lord and saviour of SV08. Please check out his page he is awesome.

I just really liked this shroud for it's simplicity and I needed something to my eddy modded SV08. Printed from PETG on Bambu Lab A1 (honestly you should print from ABS or ASA).

BOM list:

- 2x M3x8mm screws

-2x M3x4mm heat inserts

-4x 4x3mm cylinder magnets

-2x 6x3mm cylinder magnets

-tiny amount of superglue to hold the magnets inside the toolhead

-gaped the hole for eddy sensor

-filled the hole for the LED

-added grille for the non used fan holes, also decreased size of the side fan brackets

-added a bit stronger heat insert socket for one of the heat inserts

-cut off some parts at the top, for the double cable(stock toolhead cable+eddy USB cable)

-removed one of the 6mm magnet slot because I needed space for eddy sensor

-made the fan-bracket to be compatible with M3x8mm screws 

-cut off a piece for the opposite side of the 6mm magnet