Wave Magnets
A set of magnets with wave textures
24
26
0
203
updated
July 12, 2025
Description
PDF- A set of magnets with wave textures
- Designed for fridges, whiteboards, or any magnetic surface.
- Three manual stops — no AMS or MMU required.
- Print Settings:
- Layer height: 0.08 mm with a base layer of 0.16 mm
- Infill: 100%
- Magnets:
- 4 magnets (6×2 mm) per model
- Color Changes:
- Start with Blue
- Pause at layer 33 (2.72 mm) to insert magnets
- At layer 45 (3.68 mm), switch to Light Blue
- At layer 53 (4.32 mm), switch to White
- Notes:
- A 3MF print profile is included for easy setup
- Do not simplify the model (ignore floating regions warning)
- Ensure all magnets are aligned in the same direction
- Use a lighter or a heat gun to remove stringing
- Want to sell prints? Check our profile for a commercial license.
Tags
Model origin
The author marked this model as their own original creation.
