BTT PAD7 4010 fan bracket

V2 Update

Cut down the legs to make it sit flush and lower on the heatsink to give the stand more clearance. Added fillets and chamfers so supports aren't needed now.

----------------------------------------------------------------------------------------------------------------

4010 fan bracket to help cool the heatsink on the BTT PAD7.  I used the longer spare bolts that come with the PAD7 to screw into the existing standoffs the stock heatsink uses. The fan easily snaps into the bracket and is securely held in place.

I used supports for the inner ledge and screw posts.

Wall Loops: 2
Top & Bottom Layers: 4
Infill Density: 20%
Infill Pattern: Cross Hatch