Two Part Piranha Death Racer Track
A fully 3D printable 2 part track that uses a TPU tread insert into a hard material track. All for the stock frame.
6
23
1
160
updated
July 30, 2025
Description
PDFThis is a fully 3D printed 2 part track/tread design for Piranha Death Racer that uses the stock drive frames!
Print the treads out of you favorite flavor of TPU and print the tracks in whichever hard plasti material and color of your choice!
The combination of colors for the tracks now is wide open for customization.
Instead of using the 2mm rods you will use a M3x50mm bolt to connect the tracks.
Tracks - x66
Treads - x66
M3x50mm Countersunk or Button Head bolts - x66
The best way to install the treads into the tracks is to snap them in from the top instead of sliding them in.
Please give any feedback you have!
If you have not already got your own Death Racer you can find it here https://www.printables.com/model/1134616-piranha-death-racer
Tags
Model origin
The author marked this model as their own original creation.
