3.1 Gram ring hanger for ultrasonic cleaners

General:

 Just a really quick and simple ring adapter for cleaning rings un ultrasonic baths. 

As a side benefit, it doesn't disrupt or bog down the energy of the cleaner like heavier duty hangers or baskets do, and it's less prone to wearing off the rhodium coating because the contact points have plenty of flex.

Why I designed this:

I designed this as a quick way to get my wife's rings off the bottom of the ultrasonic cleaner.

Printing notes:

Layer height: any

Recommended Material: PLA or better

Supports: None

Infill: 15% (any)

Walls: 2-3

Other Modifiers: Print as oriented

Material Quantity: ≈3.1 grams

I printed from PLA on Centauri Carbon at .2 layer height with no supports, 15% rectilinear infill and 2 walls in 22 minutes.

Cautions and updates:

My wife has small fingers. for bigger rings, you may want to scale up a bit when slicing.

_____________________________________________________________________________________________________________

Don’t forget to follow me, post a make, leave a like, or tell me what you don’t like so I can make improvements.

Thanks, and Happy Printing!

Also check out:

https://fabtechmfg.square.site/