Wagon on rails picture HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 170x170mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.8mm and the Actual Depth is 1.9mm

Filaments Used:
Black - PLA+ HIGH SPEED Jamg He Black Transmission Distance: 0.3
Dark Grey - PLA Spectrum Basalt Grey Transmission Distance: 0.6
Light Grey - PLA HIGH SPEED 3DPower Telegrey Transmission Distance: 3.1
White - PLA+ HIGH SPEED Jamg He White Transmission Distance: 6.9
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Dark Grey
At layer #10 (0.88mm) swap to Light Grey
At layer #14 (1.2mm) swap to White for the rest.