Slim XIAO nRF52840 & Wio-SX1262 Kit Case

This Slim case for a (directly soldered) XIAO nRF52840 & Wio-SX1262 Kit and a 50x60x7mm LiPo. 

To increase the visibility of the status LED, stick a short piece of transparent filament in the bigger of the two holes and trim it flush.

Parts list:

• XIAO nRF52840 & Wio-SX1262 Kit (female pin headers removed on the WIO Board and directly soldered to the XIAO
• 50x60x7mm LiPo Battery
• SMA Pigtail
• 7mm latching button (SHOU HAN 7-7 ZS or similar)
• (optional) 35mm piezo buzzer
• Small piece of transparent filament

Note that directly connecting the buzzer to the XIAO is probably not a good idea. There should be enough room near the SMA Pigtail to fit some protection/drive circuitry.