Housing for electronic load

Description

This is an housing for an electronic load from aliexpress. 

It features Vents on the side and all the connections are in the front with the power connector on the side.

Needed Material

• 1x “Bottom”
• 1x “Top”
• 8x 3,5x10mm self-tapping flat-head screws
• 1x Electronic load 150W (https://de.aliexpress.com/item/1005004644040863.html)
• 4x 4mm banana sockets
• 1x electronic switch

Building Instructions

1. Remove the Power-plug from the PCB
2. Glue the Power-plug in the corresponding position in the case
3. Mount the switch and the 4mm banana sockets
4. Mount the PCB with screws in the top part
5. Mount the Display unit
6. Hook up all the electronics
7. Mount the bottom

Additional Information

This part was designed with Onshape.

If you have questions, or need additional information, feel free to comment on this design.