FabCoster25 for the FAB25 Maker Coin
A enclosure coster for the FAB25 Maker Coin. Displays your coin and lights, while shielding your desk from drips.
1
2
0
36
actualizado
7 de julio de 2025
Descripción
PDFPrint flat on the bed with no supports, 0.2 mm layer height, 2 perimeters, 15 % grid infill, and 4 solid top/bottom layers. Use a 0.4 mm nozzle and I printed my in PLA (but PETG should work too).
Etiquetas
Origen del modelo
El autor ha marcado este modelo como su creación original.