Corsair Titan AIO Benchy

Brave the high seas right inside your PC case! This is a complete, one-piece custom cap designed for Corsair's Titan series AIO liquid coolers that feature the Capswap system.

This model integrates a dramatic diorama—featuring a Benchy on a massive wave—directly onto the AIO cap base. There's no need to print separate parts or glue anything together. Just print, clean up the supports, and swap it onto your cooler for an instant, high-impact PC mod.

It’s a fantastic way to personalize your build and give your Corsair AIO a unique look that will be the centerpiece of your rig. 

I also did a Skadis version.

Print Settings

• Supports: Yes, supports are essential. The large overhang on the underside of the wave crest will require support. Tree/organic supports are highly recommended for easier removal.
• Layer Height: 0.2mm to 0.16mm is recommended to capture the smooth, detailed curves of the water and the boat.
• Infill: 15-20% is sufficient.
• Filament: PLA works perfectly for looks. For added durability and heat resistance inside a warm PC case, maybe consider using PETG or ABS.

Installation

1. After printing, carefully remove all support material. Flush cutters and a hobby knife can help clean up any tricky spots around the wave.
2. Your custom cap is now ready!
3. Simply swap it with the existing cap on your Corsair Titan AIO cooler.
4. Sit back and admire your unique, stormy seas-themed PC build!

I would love to see this installed in your rig! Please post a make and share photos of your customized cooler. Happy printing

Added Benchy

Added waves

Skadis version