Safety Gate Adapter - 1in Square Bannister

Remix of @jbehler_2645718 's safety gate adapter to work with a 1" square steel banister.
2h 34m
1× print file
0.20 mm
0.60 mm
64.00 g
1
0
0
5
updated July 4, 2025

Description

PDF

Remix of @jbehler_2645718 's safety gate adapter to work with a 1" square steel banister.

Adjusted the hole shapes to print more round on a 3D printer (model holes designed as tear drop shapes as opposed to circles)

BOM:

  • 2x M4x16 screws
  • 2x M4x20 screws
  • 4x M4 nuts
  • 1x M5 nut
  • 1x M5 washer
  • 1x M5x12 screw

Notes: 
I used an M5 Tap to cut threads for the M5 screw on the front piece. A smooth bore M5 drill would work as well. I did not make that hole tear shaped for better printing because I intended to tap it anyway.

The 3mf file has the files laid out in the optimal print orientation.

I personally used Prusament PC-CF for maximum strength, since the part is potentially load-bearing.

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

adjusted the sizes to work with a 1" square banister. adjusted the hole shapes to print more round on a 3D printer (model holes designed as tear drop shapes as opposed to circles)

License