Medal wall hanger

Set of medal wall hangers divided by most common distances: 5k, 10k, 21k, 42k. 

Each hanger have two types of attach points for medals:

• bars 
• hooks 

On the back of the hanger there are two countersinks for wall montage. It should fit common screws with head size of 5mm.

Printed with default settings:

• wall 2
• 15 infill 
• auto painted supports for hanging parts 

If you want to have numbers in different color than rest of the hanger you need to set up filament change in the slicer. 

Note1: To fit in the print bed(MK4s) rotate by 90 degrees 

Note2: Hanger_5k_v1 is a bit to big for MK4s print bed thus in needs to be scale down in slicer. Hanger_5k_v2 has smaller font size, matching other hangers, and should fit MK4s bed without scaling down.