Junimo

Would you like to support my work? :)
Check out my  full catalogue with exclusives, early access and commercial licences.
— 

A cute little Junimo Fanart from the game Stardew Valley by ConcernedApe.

Instructions:

• Chose the Body file. Pick Body 0.1 for high accuracy and Body 0.2 for lower accuracy.
• Print the Body x1 and Leaf x1 in the Junimos color
• Print the Eye x2, Left_arm x1, Right_arm x1 and Legs x1 in black
• Print the blush x2 in pink
• Assemble the Junimo with a little glue

Alternatively, you can also print the Body x1, Leaf x1 and Blush x2 in white and paint them

Size assembled: 69 x 76 x 67 mm

Print settings

Required build volume: 100 x100 x 100 mm

Material usage: 40 g

Material: PLA

Print direction: stls are rotated correctly, check images

Support: none

Nozzle size: 0,4 mm

Line width: 0,4 mm

Layer height 0,1 - 0,2 mm

Outer walls: 3

Infill: 15%

Build plate adhesion type: none