Egg cup “Avocado”

Would you like to support my work? :)
Check out my  full catalogue with exclusives, early access and commercial licences.
— 

A cute egg cup with extra space for the cut off top.

I always disliked having the shell pieces on my plate when having breakfast, so I designed a egg cup that can hold everything in place.

Just glue the two parts together and you are ready to go.

Size assembled: 96 x74 x 32 mm

Print settings

Material usage per cup: 50g

Print time per cup: 4h

The Peel: This part should be printed “upside down” (as in the images) to get a better surface texture and overhang quality. If your printer refuses to produce decent bridging results - you can use support as backup solution. If it struggles with bed adhesion - you can use a brim or print in the other way round.

Material: PLA

Print direction: stls are rotated correctly, check images

Support: none

Nozzle size: 0,4 mm

Line width: 0,4 mm

Layer height 0,2 mm

Outer walls: 3

Infill: 15%

Build plate adhesion type: none