Vacuum side brush final gear

Tired of buying the whole motor when the brush pin broke I decided to measure the broken one and print a part that broke.

It has been printed with a Sovol SV06 ACE with a 0.4 nozzle and Orcaslicer with the 0.12mm profile and the following settings:

Quality > Line Width > Default: 0.22 Outer Wall: 0.22 Inner Wall: 0.22 Sparse Infill: 0.22

Strength > Wall loops: 4 Sparse infill density: 30% Sparse infill pattern: Gyroid

Enable Support: Enable

OnShape cad drawing can be found here: https://cad.onshape.com/documents/87e2aeffc83feebc6c1993f1/w/c0a2233f348b5f49b204a81e/e/1e850f88e7f22ead2976b77e?renderMode=0&uiState=6867979481717b6dac4769c8

Compatible with BL500 motors. Some vacuum cleaners that have these motors are: VCR16, Cecotec Conga (1290, 1390, 1490, 1590) Redmond R500.