QIDI Plus4 Tool Holder (Gridfinity-compatible 1x5)

I use the tool holder in the hot chamber of QIDI Plus 4 with a specially designed 1x7-sized Gridfinity-compatible base plate as shown in the photo. It fits perfectly in the dead space in the chamber. It provides the tools exactly where I need them.

Links to the related models

I store many tools nicely in the hot chamber of my Plus 4.

• The Allen keys.
  https://www.printables.com/model/1347264-qidi-plus4-intra-chamber-allen-key-holder 
• Dedicated 1x7 Gridfinity base.
  https://www.printables.com/model/1345598-intra-chamber-gridfinity-base-plate-for-qidi-plus 
• The scraper, screw driver and wrench.
  https://www.printables.com/model/1345575-qidi-plus4-tool-holder-gridfinity-compatible-1x5 
• Spare nozzles.
  https://www.printables.com/model/1345626-nozzle-case-for-qidi-plus4-gridfinity-compatible-1 
• Lid riser parts for “QIDI Plus4 Angled Lid Risers” by FrankensteinCAD.
  https://www.printables.com/model/1347292-intra-chamber-lid-riser-holder-for-qidi-plus-4 
• Backside lid riser does not have to be removed. They stays on top of Plus4 by themselves (not in the picture).
  https://www.printables.com/model/1345691-qidi-plus4-backside-lid-riser 

Inspired by

This model was inspired by “Qidi Plus 4 tool boxes” by Mortimer @Kaminter_1585774.

https://www.printables.com/model/1184731-qidi-plus-4-tool-boxes

I made it Gridfinity compatible and a ready-to-use storage.

Gridfinity

If you are new to Gridfinity, watch this video.
https://www.youtube.com/watch?v=ra_9zU-mnl8

Printing

• No support is needed.
• PLA may not be compatible with high chamber temperatures.
• PETG should work fine.

Change Log

• 2025-07-09
  I shared the mockup models for the three tools -- the scraper, driver and wrench.