Simhub - Vocore 4.3" Thrustmaster T300/T500/TS-PC Racer/TS-XW Dash

This is a completely original model, and is the result of 16 different iterations on the design.

I tried to create the most modular (for future adaptability to other wheels) and compact unit as I possibly could and printable without requiring any supports.  I hope you like it.

Description of the parts to be printed:

• Facia - this is a beauty bezel that goes in front of your display
• ThrustmasterMountHousing - this mounts to your Thrustmaster wheel (requires removal of original coweling - 4 screws)
• Spacer - this drops in the side of your lcd display and stops it moving left to right
• Rear cover - this goes on the back of the unit.
• Rear cable bracket - this protects and covers the circuitry and has a cut out for a USB port.

Parts required:

• VOCORE 4.3" LCD Display & Micro USB cable (purchased from vocore.io)
• 2 x M2*16 Screws (affix to the bottom of the unit)
• 2 x M2*18 Screws (affix to the top of the unit)

Software required:

• Simhub Dash (Free)

Print settings:

• 20% infill, PETG, 0.15mm.

Please enjoy, and let me know how your print turns out (better yet post a Make).