Duender Stealthburner Mount
Description
PDFThe Duender SB Mount Plate should be printed with
- ABS or ASA (I suppose most filaments should be fine)
- 40% infill
- 4 walls
- 0.2mm layer height
- 0.4mm extrusion width
- 5 top / bottom layer
- (Aka Standard Voron Settings)
Requires 7x Voron standard heatset inserts
Also removes the requirement of cutting small slots for belt routing in a duender build
https://www.printables.com/model/1174545-duender-2x-creality-ender-3-corexy-convertion
Designed to be compatible with the “Voron stealthburner Clockwork2 nema17 with cable cover”
https://www.printables.com/model/642252-voron-stealthburner-clockwork2-nema17-with-cable-c
The difference between the NEMA 17 and NEMA 14 versions is the removal of the sloped clearance cut on the back that allows the NEMA 17 motor gear backlash to be set and the routing of the BL touch cable.
The NEMA 17 version is compatible with NEMA 14 motored stealthburners.
Model origin
The author remixed this model.
Differences of the remix compared to the original
Duender SB Mount Plate
- Made the plate fit the ender 3 carriage more closely
- Added duender specific belt retention features
- Made the mount compatible with clockworks 2 extruders
- Extended the BL touch mount to remove a printed part and to be level with a revo voron
- Made the mount look like a ratcheting gear
Duender SB E Plate
- Removed the small belt retention slots
- Removed the other drilled holes
