Voron V0.2 Motor Plate PUG Mount
Description
PDFDescription
A motor plate for the Voron V0.2 with a PUG mount. This model was based off of the T0/V0 Rear Separator - PG7 Mod by EddieSha. This mod also adds an extra cable pass-thru hole to the front of the plate to pass wires through for filter fans, servos, chamber temp sensors, etc.
The column in the back of the plate was from EddieSha's design and can be used to pass the PTFE tube through or for a USB camera cable. The top of that tower has a notch to secure the tube or cable with a zip tie. Personally, I used it for a USB camera, and pass the PTFE tube through by using the URBI mod by Maple Leaf Makers.
BOM
| Item | Qty |
| M3x5x4 Heatset Insert | 2 |
| M3x8 SHCS | 2 |
| Nylon Zip Tie (Optional - For PTFE or USB Camera Cable) | 1 |
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
A motor plate PUG mount for the Voron V0.2. Inspired by EddieSha's PG7 Mod, this uses PUG instead of PG7, and added another forward cable pass-thru hole for accessories (filter, chamber temp, etc). The PTFE pass-thru tower was left in place as it's also useful for routing the USB cable for a camera.
