Beelink ME mini NAS Modkit V1.1

This Modkit is divided into two parts

• Upper part

• Lower part

How to install

0. Remove the Lower part of the stock case and the Motherboard

1. Mount and Support the motherboard using the Upper part of Modkit

• Apply foam tape (2mm thick) in 2 locations

• Install insert nuts (M1.7 x L2 x OD2.5 * 4pcs) into the 4 holes and reuse the stock screws

• Be careful to align the holes of M/B with the mounting pins of Modkit

2. Attach the Upper part of stock case to the Upper part of Modkit

• Use screws (M2 x L16 * 4pcs)

3. Prepare for attaching the Lower part of Modkit

• Install insert nuts (M3 x L4 x OD5 * 4pcs) into the 4 holes

4. Install Fan into the Lower part of Modkit

• Use 80mm Fan (15T or thinner)

• Use screws and nuts (M3 size, recommend to use that included in TL-8015)

• Fan cable can be pulled out through the hole

5. Attach the Lower part to the Upper part of Modkit

• Use screws (M3 x L5 * 4pcs)

6. Turn on the Fan and control the speed

• Use PWM 4-pin fan controller

Change Log

V1.1 (2026-01-18) : Updated Lower part to enhance air flow and added model for 25T fan