hue forge alligator Alcatraz

Project: alligator alcatraz.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.96mm and the Actual Thickness is 2.95996mm

Filaments Used:
#080a0d PLA PolyLite Black  Transmission Distance: 0.3
#003b3b PLA BambuLab Basic Green  Transmission Distance: 2
#519f62 PLA Overture Matte Green  Transmission Distance: 0.4
#89908f PLA Jessie Premium Gun Metal Grey  Transmission Distance: 1.1
#fbb556 PLA Prusament Viva La Bronze  Transmission Distance: 1.9
#774730 PLA Kexcelled Brown  Transmission Distance: 1.5
#e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 7 unique filaments

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Green
At layer #16 (1.36mm) swap to Green
At layer #17 (1.44mm) swap to Gun Metal Grey
At layer #20 (1.68mm) swap to Viva La Bronze
At layer #24 (2mm) swap to Brown
At layer #31 (2.56mm) swap to White for the rest.