Buddy3D camera for CORE One printed parts

Description

Print instructions

Download the latest PrusaSlicer and use the following settings**:

• Print settings: 0.20mm STRUCTUAL
• Filament: PCCF (tested on Prusament) - please remember that when printing from PCCF,  you need a hardened nozzle
• 15% Grid infill

** Note that print settings are recommended, but you can experiment with your own.

The prints were tested on the Prusa CORE One printer.

Assembly/Dissasembly

We are adding photos to better illustrate how to put your parts together, how to fix them, and to make things clearer: