Printed very well in PC CF. Thank you for sharing, just waiting on the fan to arrive
75mm Fan Conversion for Creality Space Pi Filament Dryer
Mounts a 75 x 75 mm (30mm thick) blower into the Space Pi dryer.
75
158
1
3202
updated
July 8, 2025
Makes
Comments
@WDLandry Looks great! I would've used PC-CF if I had some at the time. Thanks for the make!
@MikeB_1505898 Curious how this fix is holding up? Can hear my fan dying and sourced the same fan as you have listed. Just wanted to get a sense how it is holding up a few months on?
@WDLandry I don't use it a whole lot, so it's maybe only 1 week's worth of total runtime. But, that was enough to wreck the old fan so it's still an improvement. I don't think you can go wrong with the change.
@MikeB_1505898 thanks for your reply. Will give it a go, appreciate you sharing the model
Install Sunon PF75301B3-A99-B fan, and stuck that fan case not fit into dryer case. need grind fan a while and cut screen bath cornen a little
probably fan different from gdtimes, order as author mention - will see (edited)