Display backcover with USB Holder

I rotate the USB Holder 35° and make it smaller. You can use the original screws (M3 10mm) to fix the backcover.

1h 25m

1× print file

0.20 mm

0.40 mm

15.00 g

371

updated February 14, 2022

Description

Printed with Prusament PETG, no supports, layer 0.2 mm.

The slot is a little wider for the USB cable from ebay ( 185119388896 ).

Normally the USB holds by itself, if not add a drop of CA glue.

The author remixed this model.